The full meaning of CLR is Calcium, Lime, and Rust which is applied to remove hard water stains from the toilet, pull tub, valves, and others. Undoubtedly, you will use CLR in your toilet to remove hard water stains without facing any problems.
So, does CLR remove hard water stains from toilet? Use CLR directly on the stains or toilet bowl and scrub with the toilet brush. Wait for 3 to 5 minutes, then flush the toilet. Now, flush the toilet several times to remove the stain. You need to do the same until the hard water stain is removed from your toilet.
This is a simple answer for you to apply CLR to remove hard water stains. Check out the below process to complete the way step-by-step.
Does CLR Remove Hard Water Stains from Toilet?
To start the process, collect the below tools and start the main process to remove hard water stains from your toilet. So, let’s get started.
- Collect CLR
- Hand Gloves
- A toilet brush
Step 1: Full the Toilet with Fresh Water
First of all, flush your toilet 1-time and then fill up the toilet bowl with fresh water. It would help if you did this thing because of using CLR proper way.
Step 2: Apply CLR
Drop half bottle of CLR on your toilet. You will also spray the CLR on the affected area to get better performance. Make sure that you are using CLR in the affected areas.
Step 3: Scrub the Toilet
After applying the CLR, you should wait a minimum of 3 minutes. After passing this time, you need to use a toilet brush to scrub affected areas. Created some extra pressure to use the scrub and clean it. Now, it is time to flush the toilet. So, flush your minimum toilet 3 times to remove hard water stains.
Prevent Hard Water Stains in Toilet
It is easy to prevent hard water stains in the toilet. You will apply multiple things to remove hard water stains in the toilet.
But, you will apply strong elements like CLR, vinegar and baking soda, hot water, lemon juice, and other elements. Generally, hard water comes with calcium and mineral, which you can remove using these elements.
CLR works properly on this matter. CLR directly works on the hard water stain and remove them easily. Try to follow the above 3-steps to complete the process.
How Long Can I Leave CLR in My Toilet?
The standard time to keep CLR in your toilet is a maximum of 3 minutes. According to some plumbers, 2 minutes is enough to leave CLR on the toilet. You don’t need to keep CLR for long because of scratching the toilet and damaging the toilet’s inside materials.
On the other hand, if the toilet comes with extremely hard water stains, you will keep a maximum of 4 minutes to solve the problem. It would be better for you to maintain an accurate time to keep CLR in your toilet.
CLR in Toilet Overnight
Never leave CLR overnight in your toilet. The standard time to keep CLR is a maximum of 2 minutes. You will keep CLR in your toilet maximum of 3 minutes without facing any problems.
When you keep CLR overnight in your toilet, your toilet becomes scratched and also damaged inside elements. So, you should keep CLR in your maximum toilet for 4 minutes to solve the problem.
Does WD-40 Remove Hard Water Stains in Toilet?
Yes, WD-40 is capable of removing hard water stains in the toilet. This chemical has soft, hard water stains and is suitable for wiping.
When you apply this element to the affected areas, you will see that the stains are soft. Now, you can use a brush to clean the toilet. Note you should use less WD-40 in your toilet because of affecting the toilet.
FAQs (Frequently Ask Questions)
Q: What happens if you leave CLR on too long?
Answer: When you leave CLR on too long, it causes damage and also scratches your toilet. On the other hand, the toilet valve also affects when you leave CLR for a long-time. You will keep the CLR in your maximum toilet for 3 minutes.
Q: Does CLR damage porcelain?
Answer: The official answer is no. CLR is safe for porcelain toilets. This element doesn’t harm this toilet. But, you should avoid using CLR for up to 3 minutes to use the porcelain toilet for a long-time.
Q: What is the very best toilet bowl cleaner?
Answer: To clean the toilet bowl, you should find out which types of cleaning problems you have on the toilet. For example, if your toilet comes with a hard water stain problem, you should use CLR or white vinegar and baking soda to solve the problem.
Q: Which is better, vinegar or CLR?
Answer: CLR is a strong element that removes tougher stains or other harmful elements. It takes a maximum of 15 minutes to solve the problem. On the other hand, vinegar is a household element that removes stains from the toilet but takes some extra time.
Does CLR remove hard water stains from toilet? It is a common question for a beginner person who first wants to clean the toilet. CLR is extremely powerful and removes hard water stains within 15 minutes. But it would help if you used this element properly, otherwise; your toilet becomes damaged and scratched.
I suggest you follow the above method with three steps to remove hard water stains using CLR. If you find any problems completing the above process, you will let me know.
Hi, there my name is William Lee and I am the founder of the DecorHomefFiner.com website. I am an expert DIY for bathrooms, living rooms, and kitchens. I am also a social helper which means I am helping people on social media about their homes.