Tension shower curtain rods on tile are always insecure and can fall on our heads by accident. We feel afraid to use the tension shower curtain rod. So, what is the solution? Or how to install a tension shower curtain rod on tile?
To fix the problem and strongly install the tension shower curtain rod on the tile, you should create more friction, secure the ends, and use strong waterproof materials. It is not much tricky to make the rod secure and assemble it.
Let’s install the tension shower curtain rod on the tile securely. Note I shared my own experience so that you will get real-life data.
How to Install a Tension Shower Curtain Rod on Tile?
We always need some tools and elements before assembling anything (listed below). To install a tension shower curtain rod on the tile, you should also collect some essential tools and elements. Collect the following tools and elements and finally complete the process.
- Suction Cup
- Glue
- Drill machine
- Screws
1. Create More Friction
The caps, made with plastic or rubber, do not make the rod secure to assemble on the tile. Epoxy and some other materials are ready to create more friction. So, you should create more friction to install the tension shower curtain rod more securely on the tile.
2. How to Install a Tension Shower Curtain Rod on Tile Using Glue?
Glue is a safe installation method that protects your tile and avoids making holes. However, to assemble the rod with glue, you will check out the following step-by-step process.
- First of all, you should collect permanent waterproof glue. The glue should be strong enough.
- Secondly, dry the wall where you use glue. Use sandpaper to clean the tile areas.
- Third, apply glue and stick the rod on both sides. Hold the rod for some time so that the glue dries and the rod becomes stuck.
These three points help you a lot to securely install your tension shower curtain rod properly. Make sure that the glue is waterproof and strong enough to hold the rod.
3. How to Install a Tension Shower Curtain Rod on Tile Using Drill?
Sometimes glue doesn’t work and is unable to hold the shower curtain rod. You can use your drill machine to securely assemble the rod. How? Let me complete the process step-by-step.
- Make the perfect measurement on the tile where you want to hole.
- You can make two small holes on two sides of the wall
- Note you should take proper measurements with the rod so that you can securely hold the rod
- Now, use the drill machine to make a hole. From both sides, you need to make 4-holes
- Finally, you need to use a screwdriver to securely assemble the tension rod
This method is far better and more secure than other ways. Because the screw strongly holds the rod even, the process helps the rod to hold when you create extreme pressure securely.
How to Install a Curved Shower Rod without Screws?
If you want to install a curved shower rod without screws, you need to use glue to stick the rod on the wall. It is easy to do. The method is also inexpensive to do. So, let’s install a curved shower rod without screws.
First, you must collect strong waterproof glue from sticking the rod. Secondly, you clean the area where you want to apply glue. You will use an old cloth to clean or dry the wall properly. You can use sandpaper to clean the toilet if the wall comes with extreme dirt and grout.
Secondly, drop some glue on the wall and stick the rod on both of sides the wall. Hold the rod for a moment until it dries properly. Finally, you install your curved shower rod without screws.
FAQs (Frequently Ask Questions)
Q: How do you get a tension shower rod to stay on the tile?
Answer: If you want to get a tension shower rod to stay on the tile, you should use strong waterproof glue or drilling. The screws also worked far better on this matter. You should check out the above way to assemble your tension shower rod to stay on the tile.
Q: Do tension shower rods work on tile?
Answer: Yes, tension shower rods work on tile without any doubts. But, it is hard enough to attach to the tile. So, you should apply screws on the tile and make the holes so that the tension rod securely holds and you don’t fall in an accident.
Q: How do you attach a shower curtain rod to tile?
Answer: You will use multiple ways to attach a shower curtain rod to the tile. The best and most secure method is screwing the rod with the tile. You can use a drill machine to make a hole. Moreover, you will also use strong glue to attach a shower curtain rod to the tile.
Final Words!
How to install a tension shower curtain rod on tile? This question arises in your mind because you need help installing a rod with tile. It is a common matter because tile and rod don’t attach to each other easily. However, you can assemble the tension shower rod with the tile using drilling, screws, glue, and some other things which I describe in the above section.
Don’t Miss:
Hi, there my name is William Lee and I am the founder of the DecorHomefFiner.com website. I am an expert DIY for bathrooms, living rooms, and kitchens. I am also a social helper which means I am helping people on social media about their homes.
