How to Remove a Shower Head That Is Glued On?

How to remove a shower head that is glued on

Removing the shower head, which comes with glue, is a little bit tricky enough. Because glued shower head doesn’t come with screws that you can remove, mineral such as scale build-up in your bathroom is the major thread to remove the glue easily.

So, how to remove a shower head that is glued on? It is hard enough to answer with a yes or no. But for sure, you can use chemicals, heat, and brute force to remove the glued shower head. On the other hand, the glue removal tool also works here properly.

Be patient and follow the below 3-ways to remove your shower head which comes with glue. So, let’s get started with the article right now.

How to Remove a Shower Head That Is Glued on?

From this section, you will discover three ways to remove the shower head, which comes with glue. Note, collet the below tools and accessories before starting the ways.

  • Head Gun or Screwdriver
  • Sandpaper
  • Mineral Removing Chemicals

Way 1: Use Heat Gun

The heat gun is one of the best solutions to remove glue and a shower head. Generally, glue is stuck to the shower head. When you melt the glue, the shower head is easily removed.

To use a heat gun, you should use a minimum 500-degree F temperature heat gun. Now, set up the heat gun at 500 degrees F and hold on to the heat gun near the glue. Move your heat gun to all of the areas of the glue so that all are melting, and you can remove the shower head.

Way 2: Chemicals

Use mineral removal chemicals to remove the glue. Glue always come with mineral and make it stuck. You will discover plenty of chemicals on the market, and you can choose any of them.

Before using the chemicals to remove the shower head, you should wear safety hand gloves and, if possible, eye-protective glass. These elements protect you from harmful chemicals.

Way 3: Brute Force

This is another way that you can follow to remove glue from the shower head. To complete the process, you can use a wrench or pliers. These two elements are capable of removing old stuck glue without any breaking problems.

Hold the pliers or wrench in your hand and force the glue so it can easily loose. If it is not working, you can use some hot water to solve the problem.

How to Remove Stuck Shower Head Ball Joint?

The shower head ball joint is stuck because of rust or dust problems. Sometimes, the problem comes out from minerals. It is hard enough to remove a ball from the shower head. However, let’s remove the shower head ball. It may take some extra time to do.

  • Collect pliers or wrench and lubricant to remove the ball
  • Put the wrench on the connectors and push it with extreme pressure. If it is not working, drop some lubricant to remove the ball.
  • On the other hand, you can cut down the connectors to remove the ball and then weld the connectors to put the ball in again.

These three points are enough to remove the ball from the shower head. If you are unable to do that, you can hire a technician to solve the problem.

Shower Head Removal Tool

To choose a shower head removal tool, you should keep in mind some serious factors. First, you need to know that your shower head comes with a glue system or screw system. Different shower head needs different tools.

Glue Shower Head

If your shower head has a glue system, you should collect a heat gun, mineral-removing chemicals, and other tools. These tools are so powerful to remove glue as well as a shower head.

Screw Shower Head

The screw shower head is easy to remove. Well, you can choose a screwdriver based on the screw sizes. Moreover, you will also choose a wrench or pliers to remove the shower head.

So, you need to check out the shower head types first, and they collect the tools to work properly. Lubricant is common to remove most shower heads, which come with screws and glues.

FAQs (Frequently Ask Questions)

Q: How do you remove a sealed shower head?

Answer: You can remove the seal from the shower head using baking soda, coke, and acid. These elements fight against seals inside elements and break down. If the seal is hard enough to remove, you will use a heat gun to heat the seal and make it loose.

Q: How to remove stuck shower head?

Answer: To remove a stuck shower head, you need to know which type of shower head comes in your bathroom. For example, you will discover two types of shower heads: glue and screw. If the shower head comes with a glue system, you should use a heat gun, chemicals, and some other tools.

Q: How to remove old stuck shower head?

Answer: You can use some lubricant to remove old stuck shower heads. Lubricant helps you lose the shower head screw first so you can hassle-free remove the screws. If the shower head comes with a glue system, you should use powerful chemicals to remove the stuck shower head.

Q: How do you release a shower head?

Answer: Using a screwdriver, heat gun, chemicals, and some other elements, you can easily release a shower head. You should check out the above three steps to release a shower head.


The glued system shower head is a little bit tricky enough to remove because of mineral problems. Mineral stuck the shower head. The lubricant doesn’t work on the glue. However, chemicals work much better than tools to remove the glue shower heads. Don’t worry; follow the above process properly and remove the glue shower head from your bathroom.

Don’t Miss:

Leave a Comment