Unclog Toilet with Bleach and Hot Water | In-Depth Discussion

Unclog toilet with bleach and hot water

Clog is stuck in our water system. Specifically, the toilet water system is easily clogged because of hard water, waste, toilet paper, and so many things. Clog sticks to the toilet water system and creates flush problems.

So, how to unclog toilet with bleach and hot water? Bleach and hot water are far better because they work against clogs and remove the clog deeply. But how can you remove it? It is tricky to answer in one word. So, I suggest you check out the following section to get a clear concept and remove the clog.

Unclog Toilet with Bleach and Hot Water

Hot water and bleach are two different things that help you to unclog the toilet. Unclogging the toilet means unclogging the toilet drain pipe.

So, what process should you follow? Check out the following step-by-step guideline to fix the problem without getting any problems.

Step 1: Prepare Bleach & Water

First of all, you need to prepare the bleach and water properly. Take a pot and pour 2/3 cup of bleach. After that, you need to take 1 cup of water in the pot. Mix them properly until it is ready.

Step 2: Spread the Mixer

Spread the mixer on the toilet. Make sure you drop a large amount of mixer on the toilet because the clog is hard, and they hardly remove when you apply a small amount of bleach and water.

Step 3: Wait & Drop Hot Water

Now, you need to wait for a minimum of 15 minutes so that the bleach works properly. However, you can also drop bleach directly without taking help from water or don’t mix the water.

After that, drop hot water. Make sure that the water does not come extremely hot. When the hot comes extremely hot, the ceramic may damage.

Finally, wipe that toilet and flush it at least 2 times. I hope that the clog in your toilet is easily removed and you can solve the problem.

Related Post: Clogged toilet paper

How to Unclog a Toilet Fast?

If you want to remove clogged so fast, you have to do some different things. However, the plunger is one of the best solutions to quickly remove a clog from the toilet. So, check out the following step-by-step guide to unclog the toilet fast.

Step 1: Insert the Plunger of the Toilet Bowl

Insert the plunger of your toilet bowl. Make sure the plunger covers the whole hole. Drop some hot water because the plunger works much better with hot water.

Step 2: Pump the Plunger Over the Hole

To pump the plunger over the hole, gently push it down. After that, you need to pull up sharply to disturb and loosen the clog.

Step 3: Flush the Toilet

Now, clog should be damaged and cleaner when you flush your toilet. So, flush your toilet at least two times so that the clog is deeply removed from your toilet.

Related Post: Can a toilet unclog itself?

Will Bleach Unclog Toilet Paper?

The answer is no. Bleach can’t dissolve the toilet paper unclogged. Even toilet paper is ready to break down the water system. In Europe and some other countries, ban toilet paper flushing.

However, some of the toilet paper is ready to dissolve. For example, dissolving toilet paper easily dissolves after 1 or 2 hours. You can purchase this type of toilet paper from the market.

But it is best for you to avoid using toilet paper for flushing. Because, they stuck the drain and also damaged the flush system. Moreover, the drain pipe is truly hard enough to repair when it gets stuck in bad toilet paper.

What Happened If My Toilet Comes with Clogged Problem?

If your toilet has a clogged problem, you will face two problems: drain pipe stuck and flushing problems. These two problems are enough to damage your toilet system.

On the other hand, when the toilet comes with a clogged problem, the refill valve is also stopped to work. So, you must remove the clogged problem as soon as possible to use the toilet without any problems.

FAQs (Frequently Ask Questions)

Q: Does pouring hot water down a toilet unclog it?

Answer: Hot water works against the clog. The hot water melts the clog or damages the clog deeply. But, it would be better for you to use bleach beside the hot water to get better performance. Moreover, hot water and vinegar also worked properly.

Q: What happens if you put bleach in a clogged toilet?

Answer: When you put bleach in a clogged toilet, it directly affects the clogged and removes the clogged. Make sure that you wait for a minimum of 15 minutes after putting the bleach because it helps the bleach works against clogged and removes them deeply.

Q: Is it OK to flush bleach down the toilet?

Answer: Bleach is an essential thing to remove stains, rust, clogged, and other harmful things on the toilet. However, if you think your toilet has a clogged or rust problem, you can use bleach to flush it down and remove them.

Conclusions

If you want to unclog the toilet with bleach and hot water, you need to follow a simple procedure. However, first of all, you must drop bleach on the toilet and wait 15 minutes. After that, you can apply hot water to the toilet and flush the toilet. Make sure you flush the toilet a minimum of 2 times so that the clog is easily drained and you can solve the problem.

Leave a Comment