Toilet bowl always plays an important role in storing and flushing water. But, it is not true that our toilet bowl is always working fine. Sometimes, its valve and other parts don’t work properly. So, why your toilet bowl water level recedes?
So, how to fix toilet bowl water level recedes? There are several reasons I found which recedes the water level. For example, the flapper, water refill valve, and flushing system cause the problem. When the refill valve tear or is damaged, it becomes unable to keep watering, and finally, the water level recedes.
So, what can you do when you find these problems in your toilet bowl? In this article, I am going to share with you A to Z information about this matter so that you can easily fix them.
Toilet Bowl Water Level Recedes
I found three main reasons on a toilet bowl causes water level recedes. Check out the following points to easily find out the problems.
- Damaged flapper
- Tear refill valve
- Drain pipe problems
These three problems are the main culprits which cause the problem. According to my experience, the refill valve is one of the major problems of these two.
So, how can you fix them? I suggest you check out the following solution and fix the problems without facing any troubles.
Related Post: Moen Shower Handle screw set size
How to Fix Toilet Flapper Problem?
To fix the toilet paper problem, you should first find out which types of problems flappers come out of. Sometimes the flapper is damaged badly and hard enough to repair. In this situation, you should purchase and replace the old one with the new one.
However, check out the following step-by-step guideline to fix the toilet flapper replacement solution. Before starting the process, you should collect a Philips number 1 screwdriver or Allen wrench.
- First of all, you need to remove the damaged flapper. If the flapper is not damaged, you can clean the flapper to solve the problem.
- After that, you need to use a screwdriver to remove the flapper deeply and assemble a new one.
- Now, it is time to assemble the new flapper with the old one. Make sure that you tighten the flapper screws properly.
These three points are truly essential to replace the flapper. If you don’t remove the flapper and find any problems, let me know in the following comment box.
How to Fix Tear Refill Valve?
A refill valve is always essential to bring water and helps the bowl to store. But, when the refill valve is unable to work, the water level receded.
In this situation, you have to fix the refill valve. Check out the refill valve first. If you find the valve torn or damaged and unable to repair, you should replace it with a new one.
To replace the new refill valve, you need to remove it first. You can use a screwdriver or wrench to remove the refill valve. After that, you can assemble the valve with a new one without facing any troubles.
How to Fix Drain Pipe Problem?
When the above two ways are not working properly, you have to check out the drain pipe. Sometimes, drain pipe creates recedes problem. A damaged or clogged water bowl pipe doesn’t bring and store the water properly.
However, it is tricky to find out the areas of the pipe where the clogged or other things are affected. You should check out the hole pipe or remove the clog.
You can use vinegar and baking soda combined to remove the clogged problem. You can contact a technician to solve the problem if you think the task is hard enough.
FAQs (Frequently Ask Questions)
Q: What causes the water level in the toilet bowl to drop?
Answer: The main causes you will get tube damaged. When the water level in the toilet bowl drops, your toilet tube is damaged. Even it may break down anytime. This is a small, flexible plastic tube that can’t take enough load.
Q: How do I fix low water level in toilet bowl?
Answer: When you face a low water level in the toilet bowl, you should remember that the fill tube is installed incorrectly. On the other hand, the toilet bowl was installed on the lower side than the pipe, which also caused this problem. Fix these problems as soon as possible to fix the low water level in the toilet bowl.
Q: Why does the water level in the toilet bowl drop when it’s windy?
Answer: This problem comes out because the air tries to rise out of the pipe as a result of strong wind above it. This cause drops in the toilet gradually, and it is truly hard enough to fix the problem. Most of the time, this problem come out because of tube problem.
Wrapping Up!
When you find a toilet bowl water level recedes problem in your toilet, you should first check out the refill valve. Moreover, the flapper or drain pipe is another two common problems that makes the water level recedes.
In my experience, the refill valve usually tears and drops the water. You need to find out the actual problem and solve it as soon as possible. Are you still confused about this matter? Without thinking anymore, you let me know in the comment box.
Hi, there my name is William Lee and I am the founder of the DecorHomefFiner.com website. I am an expert DIY for bathrooms, living rooms, and kitchens. I am also a social helper which means I am helping people on social media about their homes.