What Size Allen Wrench for Toilet Paper Holder? [A Popular Size]

by

What size Allen wrench for toilet paper holder? It depends on your task. For example, if you want to remove an Allen screw from the toilet paper holder, you can use a 1/8-inch size Allen wrench. Similarly, you can choose the number 1 Philips screwdriver to tighten the Allen screw on the toilet paper holder. However, you can also consider a flat-head screwdriver for your toilet paper holder.

This answer is tiny and you can stay connected to get further information in detail about this question. Today, I am going to share with you A to Z information about the Allen wrench and using the Allen wrench for toilet paper holders. So, let’s get started.

What Size Allen Wrench for Toilet Paper Holder?

Undoubtedly, you can use an Allen wrench for tightening and removing Allen screws. A 1/8-inches Allen wrench is a good option for tightening and removing the Allen screws. You can use this Allen wrench size to get the best performance.

On the other hand, a 1/8-inch Allen wrench helps you to remove other toilet parts. You will also use a number 1 Philips or flat-head screwdriver to remove or tighten the Allen screwdriver.

Now, you have enough information and are aware of the Allen wrench size for the Allen screw of the toilet paper holder. But, how can you remove the Allen screw from the toilet paper holder or tighten the Allen screw of your toilet paper holder?

Check out the following two processes to remove and tighten Allen screws using an Allen wrench and number 1 Philips screwdriver.

How to Remove Allen Screws from Toilet Paper Holder?

Before starting the process, you need to collect some tools. For example, you need to collect an Allen wrench. Of course, you need to consider a 1/8-inch Allen wrench to remove the screws.

Step 1: Drop Some Oil on the Screws

If you think that your toilet paper holder Allen screws are old enough and also rusted, you should drop some oil so that it can easily be removed by an Allen wrench.

Step 2: Use Allen Wrench

Now, use your Allen wrench on the screws. You should set up the wrench on the screws properly and then push the Allen wrench strongly on the right downsides. I hope that the Allen screws easily remove.

Step 3: If Wrench Is not Working

Sometimes the Allen screws become too hard to remove because of strong rust and stick out. If you face this problem, you can use the fire system. Use 60 to 70 degrees C temperature so that it can easily loose and you can remove it.

How to Tight Toilet Paper Holder with Allen Wrench?

If your toilet paper holder screw comes with an Allen screw, you can use an Allen wrench to tighten the screws properly. Check out the following steps to complete the process.

Step 1: Set Up Wrench

First and foremost, you need to set up the wrench on the screw so that you can tighten the screws. However, you need to turn the wrench’s top side strongly so that it can tighten easily.

Step 2: Use Alternative Tools

When the Allen wrench is failed to tighten the toilet paper holder, you should use a flat-head screwdriver or Philips number 1 screwdriver. You should also set up first with the screws and finally tighten the tools.

How to Replace a Toilet Paper Holder

This section helps you to replace your toilet paper holder with a new one. My toilet paper holder comes with Allen screws and I strongly believe that your toilet also comes with Allen screws. So, let’s break down the following process.

Step 1: Collect Equipment

  • A 1/8-inch Allen wrench
  • Hand Gloves
  • Number 1 Philips screwdriver

Step 2: Remove Toilet Paper Holder Screw

Now, you need to remove the toilet paper holder screws so that the toilet paper holder easily remove and you can install a new one.

Well, you Allen wrench on the screws and push down the side of the wrench so that it can easily remove. You can Push it several times so that it can smoothly remove.

If your toilet paper holder comes with a glue design and is installed on the wall, you need to hold the toilet paper holder with your two hands and push it strongly. I think it is also removed easily.

Step 3: Install a New Toilet Paper Holder

After removing the toilet paper holder, you need to clean the space, especially toilet paper holes properly. After that, you need to fit a new toilet paper holder. Hold the toilet paper holder in your hand and use another to screw the toilet paper holder.

You need to use an Allen wrench so that you can tighten the toilet paper holder properly. However, you can use the number 1 Philips screwdriver to install it when the wrench is not working.

If you want to install the toilet paper holder with screws, you can use strong waterproof glue to install the toilet paper holder.

FAQs (Frequently Ask Questions)

Q: What tool do you need to tighten the toilet paper holder?

Answer: It depends on the screw size and types of screw. You can use an Allen wrench, number 1 Philips screwdriver, and flat-head screwdriver to tighten the toilet paper holder.

Q: How do you tighten a toilet paper holder with an Allen wrench?

Answer: You need to complete a simple process to tighten the toilet paper holder using an Allen wrench. I would love to suggest you check out the above process to tighten your toilet paper holder using an Allen wrench.

Q: How do you unscrew a toilet paper holder?

Answer: If you want to unscrew the toilet paper holder, you need to use a wrench or some other tools. However, you can use an Allen wrench to unscrew the toilet paper holder without facing any problems.

Conclusions

No doubt, a 1/8-inch Allen wrench is popular among toilet handymen. Most importantly, your toilet paper holder comes in two ways such as screw and glue. However, if your toilet paper holder comes Allen screw, you can check out all of the information to get a clear concept about this matter.

Don’t Miss

Leave a Comment